Tunable biomimetic materials elaborated by ice templating and self-assembly of collagen for tubular tissue engineering.

Synthetic tubular grafts currently used in clinical context fail frequently, and the expectations that biomimetic materials could tackle these limitations are high. However, developing tubular materials presenting structural, compositional and functional properties close to those of native tissues remains an unmet challenge. Here we describe a combination of ice templating and topotactic fibrillogenesis of type I collagen, the main component of tissues' extracellular matrix, yielding highly concentrated yet porous tubular collagen materials with controlled hierarchical architecture at multiple length scales, the hallmark of native tissues' organization. By modulating the thermal conductivity of the cylindrical molds, we tune the macroscopic porosity defined by ice. Coupling the aforementioned porosity patterns with two different fibrillogenesis routes results in a new family of tubular materials whose textural features and the supramolecular arrangement of type I collagen are achieved. The resulting materials present hierarchical elastic properties and are successfully colonized by human endothelial cells and alveolar epithelial cells on the luminal side, and by human mesenchymal stem cells on the external side. The proposed straightforward protocol is likely to be adapted for larger graft sizes that address ever-growing clinical needs, such as peripheral arterial disease or tracheal and bronchial reconstructions.

Multimethod analysis of large- and low-tapered single file reciprocating instruments: Design, metallurgy, mechanical performance, and irrigation flow.

AIM: To compare eight large- and low-tapered heat-treated reciprocating instruments regarding their design, metallurgy, mechanical properties, and irrigation flow through an in silico model. METHODOLOGY: A total of 472 new 25-mm E-Flex Rex (25/.04 and 25/.06), Excalibur (25/.05), Procodile (25/.06), Reciproc Blue R25 (25/.08v), WaveOne Gold Primary (25/.07v), and Univy Sense (25/.04 and 25/.06) instruments were evaluated regarding their design (stereomicroscopy, scanning electron microscopy, and 3D surface scanning), metallurgy (energy-dispersive X-ray spectroscopy and differential scanning calorimetry), and mechanical performance (cyclic fatigue, torsional resistance, cutting ability, bending and buckling resistance). Computational fluid dynamics assessment was also conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparations. Kruskal-Wallis and one-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%). RESULTS: Instruments presented variations in blade numbers, helical angles, and tip designs, with all featuring non-active tips, symmetrical blades, and equiatomic nickel-titanium ratios. Cross-sectional designs exhibited an S-shaped geometry, except for WaveOne Gold. Univy 25/.04 and Reciproc Blue displayed the smallest and largest core diameters at D3. Univy 25/.04 and E-Flex Rec 25/.04 demonstrated the longest time to fracture (p < .05). Reciproc Blue and Univy 25/.04 exhibited the highest and lowest torque to fracture, respectively (p < .05). Univy 25/.04 and Reciproc Blue had the highest rotation angles, whilst E-Flex Rec 25/.06 showed the lowest angle (p < .05). The better cutting ability was observed with E-Flex Rec 25/.06, Procodile, Excalibur, and Reciproc Blue (p > .05). Reciproc R25 and E-Flex Rec showed the highest buckling resistance values (p < .05), with WaveOne Gold being the least flexible instrument. The impact of instruments' size and taper on wall shear stress and apical pressure did not follow a distinct pattern, although Univy 25/.04 and E-Flex Rec 25/.06 yielded the highest and lowest values for both parameters, respectively. CONCLUSIONS: Low-tapered reciprocating instruments exhibit increased flexibility, higher time to fracture, and greater angles of rotation, coupled with reduced maximum bending loads and buckling strength compared to large-tapered instruments. Nevertheless, low-tapered systems also exhibit lower maximum torque to fracture and inferior cutting ability, contributing to a narrower apical canal enlargement that may compromise the penetration of irrigants in that region.

Pain site persistence and changes from childhood to adolescence: a prospective cohort study.

BACKGROUND: Pain is a complex experience that interferes with the well-being of youth who experience it. We aimed to assess whether recurrent pain sites in childhood can predict later recurrent pain sites prospectively. METHODS: Pain was assessed using the Luebeck Pain Screening Questionnaire at ages 7, 10, and 13 from the Generation XXI cohort. We used multinomial regression to assess the association of recurrent pain sites at ages 7 and 10 with those at age 13. RESULTS: We included 3833 participants. Boys with recurrent abdominal/pelvic pain at age 7 were more likely to report headaches (OR 2.81; 95%CI 1.48-5.34), abdominal/pelvic (OR 2.92; 95%CI 1.46-5.84), and musculoskeletal pain (OR 1.55; 95%CI 1.02-2.34) at age 13. Girls with recurrent abdominal/pelvic pain at age 7 were more likely to report both musculoskeletal (OR 1.62; 95%CI 1.10-2.40) and abdominal/pelvic pain (OR 1.74; 95%CI 1.15-2.65). At age 10, all pain sites were associated with pain in the same site at age 13. CONCLUSION: Recurrent abdominal/pelvic pain at age 7 may be related to the development of various pains in adolescence. Pain at a given site at age 10 can be associated with pain at that same site at age 13. IMPACT: Recurrent abdominal or pelvic pain during childhood was distinctively associated with an increased risk of recurrent pain in other sites during adolescence. Recurrent pain during childhood was associated with pain in the same sites at age 13, and this persistence seemed to emerge between the ages of 7 and 10 for both boys and girls. Studying early pain sites may add to the understanding of the etiology of chronic pain.

Decoding Single and Paired Phonemes Using 7T Functional MRI.

Several studies have shown that mouth movements related to the pronunciation of individual phonemes are represented in the sensorimotor cortex. This would theoretically allow for brain computer interfaces that are capable of decoding continuous speech by training classifiers based on the activity in the sensorimotor cortex related to the production of individual phonemes. To address this, we investigated the decodability of trials with individual and paired phonemes (pronounced consecutively with one second interval) using activity in the sensorimotor cortex. Fifteen participants pronounced 3 different phonemes and 3 combinations of two of the same phonemes in a 7T functional MRI experiment. We confirmed that support vector machine (SVM) classification of single and paired phonemes was possible. Importantly, by combining classifiers trained on single phonemes, we were able to classify paired phonemes with an accuracy of 53% (33% chance level), demonstrating that activity of isolated phonemes is present and distinguishable in combined phonemes. A SVM searchlight analysis showed that the phoneme representations are widely distributed in the ventral sensorimotor cortex. These findings provide insights about the neural representations of single and paired phonemes. Furthermore, it supports the notion that speech BCI may be feasible based on machine learning algorithms trained on individual phonemes using intracranial electrode grids.

Interrelationships among skeletal age, growth status and motor performances in female athletes 10-15 years.

BACKGROUND: Motor performances of youth are related to growth and maturity status, among other factors. AIM: To estimate the contribution of skeletal maturity status per se to the motor performances of female athletes aged 10-15 years and the mediation effects of growth status on the relationships. SUBJECTS AND METHODS: Skeletal age (TW3 RUS SA), body size, proportions, estimated fat-free mass (FFM), motor performances, training history and participation motivation were assessed in 80 non-skeletally mature female participants in several sports. Hierarchical and regression-based statistical mediation analyses were used. RESULTS: SA per se explained a maximum of 1.8% and 5.8% of the variance in motor performances of athletes aged 10-12 and 13-15 years, respectively, over and above that explained by covariates. Body size, proportions, and hours per week of training and participation motivation explained, respectively, a maximum of 40.7%, 18.8%, and 22.6% of the variance in performances. Mediation analysis indicated specific indirect effects of SA through stature and body mass, alone or in conjunction with FFM on performances. CONCLUSION: SA per se accounted for small and non-significant amounts of variance in several motor performances of female youth athletes; rather, SA influenced performances indirectly through effects on stature, body mass and estimated FFM.

Pain history and experimental pressure pain responses in adolescents: Results from a population-based birth cohort.

BACKGROUND: Sensitized pain mechanisms are often reported in musculoskeletal pain conditions, but population-based paediatric studies are lacking. We assessed whether adolescents with musculoskeletal pain history had evidence of increased responsiveness to experimental pressure stimuli. METHODS: Data were from 1496 adolescents of the Generation XXI birth cohort. Pain history was collected using the Luebeck Pain Questionnaire (self-reported at 13, parent-reported at 7 and 10 years). Two case definitions for musculoskeletal pain were considered: (1) cross-sectional-musculoskeletal pain lasting more than 3 months at age 13 and (2) longitudinal-musculoskeletal pain at age 13 with musculoskeletal pain reports at ages 7 and/or 10. Lower limb cuff pressure algometry was used to assess pain detection and tolerance thresholds, conditioned pain modulation effects (CPM, changes in thresholds in the presence on painful conditioning) and temporal summation of pain effects (TSP, changes in pain intensity to 10 phasic painful cuff stimulations). RESULTS: Adolescents with musculoskeletal pain at age 13 plus a history of pain in previous evaluations (longitudinal definition) had lower pain tolerance thresholds compared to the remaining sample (40.2 v. 49.0 kPa, p = 0.02), but showed no differences in pain detection threshold, CPM effect and TSP effect. Pain sensitivity, CPM effects and TSP effects were not significantly different when the current pain only case definition (cross-sectional) was used. CONCLUSIONS: Adolescents with current musculoskeletal pain who had a history of pain since childhood had lower tolerance to cuff stimulation. This may suggest long-standing musculoskeletal pain since childhood may contribute to sensitisation, rather than the presence of current pain only. SIGNIFICANCE: Repeated musculoskeletal pain up to age 13 years may contribute to higher pain sensitivity (particularly lowered pressure pain tolerance) in the general adolescent population. This does not seem to be the case when reported pain experiences are recent or when the outcomes are temporal pain summation or CPM. In this community-based paediatric sample, the vast majority showed no sign of altered pain processing, but a small fraction may reveal some pain sensitization at 13 years of age.

Characterization of four heat-treated reciprocating instruments: Design, metallurgy, mechanical performance, and irrigation flow patterns.

AIM: To compare the design, metallurgy, and mechanical properties of four heat-treated reciprocating instruments coupled with the evaluation of the irrigation flow using an in silico model. METHODOLOGY: New EdgeOne Fire Primary, Easy-File Flex Regular 25, WaveOne Gold Primary and Reciproc Blue R25 instruments (n = 124) were initially evaluated regarding their design through stereomicroscopy, scanning electron microscopy and 3D surface scanning. In addition, energy-dispersive X-ray spectroscopy was utilized to determine their elemental composition, and differential scanning calorimetry tests to evaluate their phase transformation temperatures. Their mechanical performance was further assessed through torsional and bending tests. Using scans obtained from a real tooth and the instruments, a computational fluid dynamics assessment was conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparation. Mood's median and One-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%). RESULTS: Reciproc Blue exhibited a superior number of blades (n = 8), whereas EdgeOne Fire had the highest overall volume (4.38 mm3 ) and surface area (32.32 mm2 ). At the 3-mm axial level, EdgeOne Fire displayed the lowest core diameter (0.13 mm), while Reciproc Blue had the highest (0.16 mm). All blades were symmetrical, and the tips of the instruments were non-active but differed from each other. The most irregular surfaces were observed in EdgeOne Fire and Easy-File Flex. All instruments were manufactured from nickel-titanium alloys and exhibited distinct phase transformation temperatures. WaveOne Gold and Reciproc Blue demonstrated the highest maximum torque values (1.87 and 1.62 N cm, respectively), while the lowest was observed on EdgeOne Fire (1.21 N cm) (p < .05). The most flexible (p < .05) were EdgeOne Fire (angle of rotation: 602.6°; maximum bending load: 251.4 g.f) and Reciproc Blue (533.2° and 235.6 g.f). There were no significant differences observed in the irrigation flow among the four domains generated by the tested instruments. CONCLUSIONS: Despite observing variations in the design, phase transformation temperatures, and in the torsional and bending test outcomes among the four heat-treated reciprocating instruments, no significant differences were found in the irrigation flow pattern among the different groups in the simulated root canal preparations.

To flat or not to flat? Exploring the impact of flat-side design on rotary instruments using a comprehensive multimethod investigation.

AIM: To assess the influence of a flat-side design on the geometry, metallurgy, mechanical performance and shaping ability of a novel nickel-titanium rotary instrument. METHODOLOGY: Sixty-five new 25-mm flat-side rotary instruments (size 25, taper 0.04) and their nonflat-side prototypes (n = 65) were assessed for major deformations and examined regarding macroscopic and microscopic design, determination of nickel and titanium elements ratio, measurement of phase transformation temperature and evaluation of mechanical performance parameters including time/cycles to fracture, maximum torque, angle of rotation, maximum bending and buckling strengths and cutting ability. Additionally, unprepared canal areas, volume of hard tissue debris and percentage reduction of dentine thickness were calculated for each tested instrument after preparing mesial canals of mandibular molars (n = 12), using micro-CT imaging. Statistical analyses were performed using the U-Mann-Whitney test and independent Student t-test (α = 5%). RESULTS: The number of spirals (n = 8) and blade direction (clockwise) were similar between both flat and nonflat instruments, whilst the helical angles were equivalent (⁓25°). Flat-instruments showed inconsistencies in the homogeneity of the gold colour on the flat-side surface, blade discontinuity, and incomplete and variable S-shaped cross-sections. The titanium-to-nickel ratios were equivalent, but significant differences in the R-phase finish and austenitic start phase transformation temperatures were observed between the flat and nonflat-side instruments. The flat-side instruments demonstrated superior cutting ability compared to the nonflat instruments, as well as, significantly lower values for time to fracture, rotation to fracture and maximum torque to fracture (p < .001). No statistical difference was observed between tested instruments regarding angle of rotation (p = .437), maximum bending (p = .152) and buckling load (p = .411). Preparation protocols using flat and nonflat instruments did not show any statistically significant differences (p > .05). All flat-side instruments exhibited deformation after shaping procedures. CONCLUSIONS: The flat-side instrument showcased enhanced cutting ability compared to its nonflat counterpart. However, it exhibited inferior performance in terms of time, rotation and maximum torque to fracture, along with distinct phase transformation temperatures. No differences were observed in the titanium-to-nickel ratios, angle of rotation, maximum bending, buckling load, preparation time, percentage of untouched canal walls, volume of hard tissue debris and percentage reduction of dentine thickness.

Parallel anagenetic patterns in endemic Artemisia species from three Macaronesian archipelagos.

Anagenetic speciation is an important mode of evolution in oceanic islands, yet relatively understudied compared to adaptive radiation. In the Macaronesian region, three closely related species of Artemisia (i.e. A. argentea, A. thuscula and A. gorgonum) are each endemic from a single archipelago (i.e. Madeira, Canary Islands and Cape Verde, respectively), representing a perfect opportunity to study three similar but independent anagenetic speciation processes. By analysing plastid and nuclear DNA sequences, as well as nuclear DNA amount data, generated from a comprehensive sampling in all the islands and archipelagos where these species are currently distributed, we intend to find common evolutionary patterns that help us explain the limited taxonomic diversification experienced by endemic Macaronesian Artemisia. Our time-calibrated phylogenetic reconstruction suggested that divergence among the three lineages occurred in a coincidental short period of time during the Pleistocene. Haplotype and genetic differentiation analyses showed similar diversity values among A. argentea, A. thuscula and A. gorgonum. Clear phylogeographic patterns-showing comparable genetic structuring among groups of islands-were also found within the three archipelagos. Even from the cytogenetic point of view, the three species presented similarly lower genome size values compared to the mainland closely related species A. arborescens. We hypothesize that the limited speciation experienced by the endemic Artemisia in Madeira, Canary Islands and Cape Verde archipelagos could be related to their recent parallel evolutionary histories as independent lineages, combined with certain shared characteristics of seed dispersal, pollen transport and type of habitat.

Comparative analysis of reciprocating and flat-side heat-treated rotary single-file systems: Design, metallurgical characteristics, and mechanical performance.

AIM: To compare two flat-side single-file rotary instruments with three single-file reciprocating systems through a multimethod assessment. METHODOLOGY: A total of 290 new NiTi single-file rotary (AF F One Blue 25/0.06 and Platinum V.EU 25/0.06) and reciprocating (One Files Blue R25, Reciproc Blue R25, Reciproc R25) instruments were selected, carefully examined for any major deformations, and evaluated regarding their macroscopic and microscopic design, nickel and titanium elements ratio, phase transformation temperatures, and mechanical performance (time/rotation to fracture, maximum torque, angle of rotation, microhardness, maximum bending, and buckling strengths). One-way anova post hoc Tukey, T-test, and nonparametric Mood's median tests were used for statistical comparisons (α = 5%). RESULTS: Tested instruments had identical blade counts and near-identical helical angles of approximately 24° (rotary instruments) and 151° (reciprocating instruments). The flat-side analysis revealed a few inconsistencies, such as discontinuity segments, different orientations, and gaps in the homogeneity of the bluish colour. Microscopically, flat-side instruments exhibited blade discontinuity and an incomplete S-shaped cross-section. The surface finish was smoother for One Files Blue and more irregular for both rotary instruments. There were distinct phase transformation temperatures amongst all instruments. All heat-treated instruments were in R-phase arrangement, and Reciproc was in R-phase plus austenite at test temperature (20°C). Compared with the reciprocating instruments, both flat-side instruments exhibited lower results in the cyclic fatigue tests using two different clockwise kinematics, maximum torque, angle of rotation, and maximum buckling strength (p < .05). The rotary systems also exhibited low flexibility (p < .05). AF F One Blue had the lowest microhardness, whilst Reciproc had the highest value. CONCLUSION: This multimethod investigation revealed that the flat-side rotary instruments underperformed the reciprocating instruments regarding cyclic fatigue (with two different clockwise kinematics), maximum torque, angle of rotation, maximum buckling strength, and flexibility. Manufacturing inconsistencies were also observed in some of the flat-side instruments, including discontinuity segments, different orientations, and in the homogeneity of their bluish colour given by the heat treatment.

COVID-19 Contact Tracing as an Indicator for Evaluating a Pandemic Situation: Simulation Study.

BACKGROUND: Contact tracing is a fundamental intervention in public health. When systematically applied, it enables the breaking of chains of transmission, which is important for controlling COVID-19 transmission. In theoretically perfect contact tracing, all new cases should occur among quarantined individuals, and an epidemic should vanish. However, the availability of resources influences the capacity to perform contact tracing. Therefore, it is necessary to estimate its effectiveness threshold. We propose that this effectiveness threshold may be indirectly estimated using the ratio of COVID-19 cases arising from quarantined high-risk contacts, where higher ratios indicate better control and, under a threshold, contact tracing may fail and other restrictions become necessary. OBJECTIVE: This study assessed the ratio of COVID-19 cases in high-risk contacts quarantined through contact tracing and its potential use as an ancillary pandemic control indicator. METHODS: We built a 6-compartment epidemiological model to emulate COVID-19 infection flow according to publicly available data from Portuguese authorities. Our model extended the usual susceptible-exposed-infected-recovered model by adding a compartment Q with individuals in mandated quarantine who could develop infection or return to the susceptible pool and a compartment P with individuals protected from infection because of vaccination. To model infection dynamics, data on SARS-CoV-2 infection risk (IR), time until infection, and vaccine efficacy were collected. Estimation was needed for vaccine data to reflect the timing of inoculation and booster efficacy. In total, 2 simulations were built: one adjusting for the presence and absence of variants or vaccination and another maximizing IR in quarantined individuals. Both simulations were based on a set of 100 unique parameterizations. The daily ratio of infected cases arising from high-risk contacts (q estimate) was calculated. A theoretical effectiveness threshold of contact tracing was defined for 14-day average q estimates based on the classification of COVID-19 daily cases according to the pandemic phases and was compared with the timing of population lockdowns in Portugal. A sensitivity analysis was performed to understand the relationship between different parameter values and the threshold obtained. RESULTS: An inverse relationship was found between the q estimate and daily cases in both simulations (correlations >0.70). The theoretical effectiveness thresholds for both simulations attained an alert phase positive predictive value of >70% and could have anticipated the need for additional measures in at least 4 days for the second and fourth lockdowns. Sensitivity analysis showed that only the IR and booster dose efficacy at inoculation significantly affected the q estimates. CONCLUSIONS: We demonstrated the impact of applying an effectiveness threshold for contact tracing on decision-making. Although only theoretical thresholds could be provided, their relationship with the number of confirmed cases and the prediction of pandemic phases shows the role as an indirect indicator of the efficacy of contact tracing.

Multimethod analysis of three rotary instruments produced by electric discharge machining technology.

AIM: This study aimed to compare three rotary instruments produced by the EDM process with the heat-treated ProTaper Gold system regarding design, metallurgy, mechanical properties and shaping ability. METHODOLOGY: HyFlex EDM (25/~), Neoniti (25/.06), EDMax (25/.06) and ProTaper Gold (25/.08v) instruments (n = 58 per group) were compared regarding design, metallurgy and mechanical performance. Unprepared canal areas were calculated for each system after preparation of mesiobuccal, mesiolingual and distal canals of mandibular molars (15 canals per group) using micro-CT technology. Statistical analyses were performed using One-way anova post-hoc Tukey and Kruskal-Wallis post-hoc Dunn's tests (α = 5%). RESULTS: All instruments had asymmetrical blades, no radial lands, no major defects and almost equiatomic nickel/titanium ratios, but different cross-section designs, tip geometries and surface appearances. Although instruments had distinct transformation temperature curves, they showed crystallographic martensitic arrangement at 21°C and mixed austenite plus R-phase at body temperature. Neoniti and HyFlex EDM showed similar results in all mechanical tests (p > .05), while EDMax and ProTaper Gold had similar time to fracture (p = .841), maximum bending load (p = .729), and cutting ability (p = .985). ProTaper Gold showed the highest torque to failure (p < .001) and HyFlex EDM had the lowest buckling resistance (p < .001). Mean percentages of unprepared canal areas ranged from 20.4% to 25.7% in the mesial canals, and from 20.8% to 26.2% in the distal canal, with no statistical differences among systems (p > .05). CONCLUSIONS: Instruments' geometry and phase transformation temperatures influenced the results of the mechanical tests, but not their shaping ability.

Slash and burn management and permanent or rotation agroforestry systems: A comparative study for C sequestration by century model simulation.

Understanding the effects of agroforestry systems (AFs) on soil organic carbon (SOC) requires long-term experiments, but scenarios simulations can anticipate the potential of these systems to sequester or lose carbon (C). This study aimed to simulate the SOC dynamics in slash and burn management (BURN) and AFs using the Century model. Data from a long-term experiment implemented in the Brazilian semiarid region were used to simulate SOC dynamics under BURN and AFs situations, and the natural vegetation (NV) "Caatinga" as a reference. BURN scenarios considered different fallow periods (0, 7, 15, 30, 50 and 100 years) among cultivation of the same area. The two types of AFs (agrosilvopastoral-AGP and silvopastoral-SILV) were simulated in two contrasting conditions: (i) each one of the AFs and also NV area were permanently conducted with no rotation among these areas; and (ii) the two AFs and NV rotated among them every 7 years. The correlation coefficients (r), coefficients of determination (CD) and coefficients of residual mass (CRM) showed adequate performance, meaning that the Century model is able to reproduce the SOC stocks in the slash and burn management and AFs situations. The equilibrium points of NV SOC stocks stabilized around 30.3 Mg ha-1, as similar to the measured average of 28.4 Mg ha-1 at field conditions. The adoption of BURN without a fallow period (0 years) resulted in a reduction of 50% of SOC, approximately 20 Mg ha-1, after the first 10 years. Permanent (p) and rotating (r) AFs management systems recovered (in 10 years) fast to the original SOC stocks, resulting in higher SOC stocks than NV SOC at equilibrium. The fallow period of 50 years is necessary to recovery SOC stocks in the Caatinga biome. The simulation shows that the AFs systems increase more SOC stocks than observed in natural vegetation in long-term.

Design, metallurgy, mechanical properties, and shaping ability of 3 heat-treated reciprocating systems: a multimethod investigation.

OBJECTIVE: This study aimed to compare 3 reciprocating systems regarding design, metallurgy, mechanical properties, and shaping ability. MATERIALS AND METHODS: New Reciproc Blue R25, WaveOne Gold Primary, and REX 25 instruments (n=41 per group) were analyzed regarding design, metallurgy, and mechanical performance, while shaping ability (untouched canal walls, volume of removed dentin, and hard tissue debris) was tested in 36 anatomically matched root canals of mandibular molars. Results were compared using one-way ANOVA post hoc Tukey and Kruskal-Wallis tests with a significant level set at 5%. RESULTS: All instruments showed symmetrical cross sections with asymmetrical blades, no radial lands, no major defects, and an almost equiatomic nickel and titanium ratio. The highest R-phase start temperatures were observed with WaveOne Gold (46.1°C) and REX (44.8°C), while Reciproc Blue had the lowest R-phase start (34.5°C) and finish (20°C) temperatures. WaveOne Gold had the lowest time to fracture (169 s) and the highest maximum load (301.6 gf) (P <0.05). The maximum torque of Reciproc Blue (2.2 N.cm) and WaveOne Gold (2.1 N.cm) were similar (P >0.05), but lower than REX (2.6 N.cm) (P <0.05). No statistical differences were observed among instruments in the angle of rotation (P >0.05) and in the shaping ability in both mesial and distal canals (P >0.05). CONCLUSION: Although the overall design, temperature transition phases and mechanical behavior parameters were different among tested instruments, they were similar in terms of shaping ability. CLINICAL RELEVANCE: All tested heat-treated NiTi reciprocating systems showed similar shaping ability, without clinically significant errors.

Mechanisms of speed encoding in the human middle temporal cortex measured by 7T fMRI.

Perception of dynamic scenes in our environment results from the evaluation of visual features such as the fundamental spatial and temporal frequency components of a moving object. The ratio between these two components represents the object's speed of motion. The human middle temporal cortex hMT+ has a crucial biological role in the direct encoding of object speed. However, the link between hMT+ speed encoding and the spatiotemporal frequency components of a moving object is still under explored. Here, we recorded high resolution 7T blood oxygen level-dependent BOLD responses to different visual motion stimuli as a function of their fundamental spatial and temporal frequency components. We fitted each hMT+ BOLD response with a 2D Gaussian model allowing for two different speed encoding mechanisms: (1) distinct and independent selectivity for the spatial and temporal frequencies of the visual motion stimuli; (2) pure tuning for the speed of motion. We show that both mechanisms occur but in different neuronal groups within hMT+, with the largest subregion of the complex showing separable tuning for the spatial and temporal frequency of the visual stimuli. Both mechanisms were highly reproducible within participants, reconciling single cell recordings from MT in animals that have showed both encoding mechanisms. Our findings confirm that a more complex process is involved in the perception of speed than initially thought and suggest that hMT+ plays a primary role in the evaluation of the spatial features of the moving visual input.

Circulating Tumor Cells in Cancer Diagnostics and Prognostics by Single-Molecule and Single-Cell Characterization.

Circulating tumor cells (CTCs) represent an interesting source of biomarkers for diagnosis, prognosis, and the prediction of cancer recurrence, yet while they are extensively studied in oncobiology research, their diagnostic utility has not yet been demonstrated and validated. Their scarcity in human biological fluids impedes the identification of dangerous CTC subpopulations that may promote metastatic dissemination. In this Perspective, we discuss promising techniques that could be used for the identification of these metastatic cells. We first describe methods for isolating patient-derived CTCs and then the use of 3D biomimetic matrixes in their amplification and analysis, followed by methods for further CTC analyses at the single-cell and single-molecule levels. Finally, we discuss how the elucidation of mechanical and morphological properties using techniques such as atomic force microscopy and molecular biomarker identification using nanopore-based detection could be combined in the future to provide patients and their healthcare providers with a more accurate diagnosis.

Characterization of the file-specific heat-treated ProTaper Ultimate rotary system.

AIM: To compare design, metallurgy and mechanical performance of the ProTaper (PT) Ultimate system with instruments of similar dimensions from the ProGlider, PT Gold and PT Universal systems. METHODOLOGY: New PT Ultimate instruments (n = 248) were compared with instruments of similar dimensions from ProGlider (n = 31), PT Gold (n = 155) and PT Universal (n = 155) systems regarding their number of spirals, helical angle, blade symmetry, tip geometry, surface finishing, nickel/titanium ratio, phase transformation temperatures and mechanical performance. One-way anova and nonparametric Mood's median tests were used for statistical comparison (α = 5%). RESULTS: All instruments had symmetrical blades without radial lands or flat sides, similar surface finishing and an almost equiatomic nickel/titanium ratio, whilst the number of spirals, helical angles and the tip geometry were different. PT Ultimate instruments showed 3 distinct heat treatments that matched with the colour of their metal wire. Slider and ProGlider instruments had similar R-phase start (Rs) and R-phase finish (Rf) temperatures. SX, F1, F2, F3 and Shaper instruments showed equivalent heat treatments (Rs ~45.6°C and Rf ~28.3°C) that were similar to their PT Gold counterparts (Rs ~47.9°C and Rf ~28.2°C), but completely distinct to the PT Universal ones (Rs ~16.2°C and Rf ~-18.2°C). Amongst the PT Ultimate instruments, the lowest maximum torques were observed in the SX (0.44 N cm), Slider (0.45 N cm) and Shaper (0.60 N cm) instruments, whilst the highest was noted in the FXL (4.90 N cm). PT Ultimate Slider and ProGlider had similar torsional (~0.40 N cm) and bending loads (~145.0 gf) (p = 1.000), whilst the other PT Ultimate instruments showed statistically significantly lower maximum torque, higher angle of rotation and lower bending load (higher flexibility) than their counterparts of the PT Universal and PT Gold systems. CONCLUSIONS: The PT Ultimate system comprises instruments with 3 distinct heat treatments that showed similar phase transformation temperatures to their heat-treated analogues. PT Ultimate instruments presented lower torsional strength and superior flexibility than their counterparts, whilst maximum torque, angle of rotation and bending loads progressively increased with their sizes.

Diamondlike Carbon Surface Treatment Improves the Fatigue Resistance of Ultrasonic Tips.

INTRODUCTION: The aim of this study was to compare E1-Irrisonic (Helse Ultrasonics, Ocoee, FL) and Irri Black (Helse Ultrasonics), a novel ultrasonic tip with diamondlike carbon treatment, regarding their design, metallurgy, microhardness, bending resistance, and time to fracture under the oscillatory fatigue test. METHODS: A total of 17 E1-Irrisonic and 17 Irri Black new ultrasonic tips were selected. The tip geometry and surface finishing were assessed using scanning electron microscopy. The elemental composition was defined by energy-dispersive X-ray spectroscopy. Hardness Knoop was calculated using a microhardness tester. The maximum load required to displace the instrument in 45° was recorded in gram/force, oscillatory fatigue was measured in seconds at the moment of instrument fracture, and the size of the separate fragments was determined in millimeters. The Student t test was used for statistical comparison (α = 5%). RESULTS: Scanning electron microscopic analyses revealed that E1-Irrisonic had a flat end tip, whereas a noncutting rounded tip was observed in Irri Black. The surface of E1-Irrisonic was smoother than Irri Black, which was irregular. Energy-dispersive X-ray spectroscopic analyses showed that the elemental compositions of the E1-Irrisonic and Irri Black tips were consistent with stainless steel and titanium-aluminum alloys, respectively. Irri Black showed significantly higher bending load resistance, time to fracture under oscillatory motion, and hardness Knoop than the E1-Irrisonic tip (P < .05), whereas the length of fragments was similar (P > .05). CONCLUSION: Diamondlike carbon treatment improved hardness Knoop and reduced the flexibility of the Irri Black ultrasonic tip, improving its time to fracture under oscillatory motion compared with the nontreated E1-Irrisonic tip.

Construção de gerontotecnologias de cuidado no contexto da pessoa idosa com doença de Alzheimer / Building care gerontotechnologies in the context of elderly person with Alzheimer's disease

RESUMO Objetivo construir gerontotecnologias de cuidado para auxiliar familiares cuidadores nas dificuldades vivenciadas no contexto das pessoas idosas com doença de Alzheimer. Métodos pesquisa-ação estratégica, realizada com sete familiares cuidadores de idosos com doença de Alzheimer e 12 acadêmicos da saúde de uma universidade. Os dados foram coletados com os familiares cuidadores, por meio de entrevista semiestruturada. Com os acadêmicos, realizou-se três grupos focais. Os dados foram submetidos à técnica de análise textual discursiva. Resultados emergiram oito dificuldades vivenciadas pelos familiares cuidadores correspondentes aos aspectos cognitivos, as Atividades de Vida Diária e as questões relativas à família no cuidado. Foi possível construir 14 gerontotecnologias de cuidado na forma de produto. Conclusão foram construídas gerontotecnologias para auxiliar familiares cuidadores nas dificuldades vivenciadas junto às pessoas idosas que vivem com doença de Alzheimer. Contribuições para a prática: as gerontotecnologias construídas possuem potencial de contribuir com o processo de cuidado, uma vez que podem ser utilizadas por familiares cuidadores no cotidiano e serem adaptando para cada realidade, a partir da necessidade singular de cada pessoa idosa.

ABSTRACT Objective to build care gerontotechnologies to help family caregivers with the difficulties experienced in the context of elderly people with Alzheimer's disease. Methods strategic action research carried out with seven family caregivers of elderly people with Alzheimer's disease and 12 health academics from a university. Data was gathered from the family caregivers using a semi-structured interview. Three focus groups were held with the academics. The data was submitted to the discursive textual analysis technique. Results eight difficulties experienced by family caregivers emerged, corresponding to cognitive aspects, Activities of Daily Living and issues relating to family care. It was possible to construct 14 care gerontotechnologies in product form. Conclusion gerontotechnologies were built to help family caregivers with the difficulties experienced by elderly people living with Alzheimer's disease. Contributions to practice the gerontotechnologies developed have the potential to contribute to the care process, since they can be used by family caregivers on a daily basic and can be adapted to each reality, based on the unique needs of each elderly person.